一．Product Overview
Fire truck operations often involve heavy equipment such as portable pumps, hose carts,
motorized robots, escape air cushions, mobile lighting towers, and modular devices weighing
between 60kg and 200kg. Traditional hydraulic or electric-powered lifting solutions are costly,
energy-intensive, and place excessive strain on vehicle batteries—often requiring four
firefighters to manually lift and transport these items.Our company has developed a fully
automated lifting mechanism that revolutionizes this process. Where previously four personnel
were needed to handle heavy equipment, our system allows a single operator to effortlessly lift,
position, and move these devices with minimal physical strain.
二. Technical Parameters
1. Portable pump handling stand (floor type) with adjustable vertical stroke of 1.0-1.2m,
model: ZS-1.2M;
2. Portable pump handling stand (floor type) with adjustable vertical stroke of 1.2-1.5m,
model: ZS-1.5M;
3. ZS-1.2M handling stand (floor type) overall dimensions ≤1060×900×1100mm;
4. ZS-1.5M handling stand (floor type) overall dimensions ≤1110×900×1200mm;
5. Compatible with equipment cases of various heights, featuring adjustable stroke of either
1.0-1.2m or 1.2-1.5m;
6. The stand rails are made of aluminum alloy 6061, while the lifting mechanism uses Q235A
steel plate with galvanized and powder-coated finish. Total weight ≤150kg;
7. Employing cylinders and solenoid valves from domestic premium brand: AIRTAC;
8. Advantages: Single-operator capable, no manual lifting required, deployment time 10-15
seconds;
9. The stand features three control modes: emergency manual switch, spring-cable electric
push-button switch, and mobile wireless remote switch for pneumatic control, ensuring
enhanced reliability and operational convenience;
10. Maximum load capacity of the handling stand (floor type) ≤200kg.
三．Specific Implementation Methods and Accompanying Drawings:
Retracted Position 1
Deployed Position 2 (Auto Horizontal Extension）
Deployed Position 3 (Ground-Level Deployment)
